Advantages of Yamaha Cylinder

1, the use of Yamaha cylinder operation is very simple and convenient, installation is very easy without too complex steps and usage, so it is not high requirements for the operation of personnel, do not need a high professional knowledge

2. Compared with other action elements, the output force of the Yamaha cylinder is relatively large

3, Yamaha cylinder is not only used very simple and easy to use, Cylinder for YAMAHA it for some of the requirements of the environment is not high, whether high-temperature operation or low-temperature operation of the Yamaha cylinder can be normal work, and it has a certain degree of waterproof and dustproof performance, Cylinder for YAMAHA can adapt to a lot of harsh use environment, This is also the reason why the Yamaha cylinder is widely used and recommended.

General use and maintenance of Yamaha cylinders

1. Yamaha cylinder should be opened before the installation of the box inspection components in the transport process, whether there is damage and bolt loosening phenomenon, Cylinder for YAMAHA and remove the protective cap and protective oil after the use of the instructions required for installation.

2. Yamaha cylinders should be installed to avoid the use of piston rods under eccentric or transverse load.

3. Compressed air moisture and impurities, the impact of the life of the Yamaha cylinder, should remove the water and impurities in the air, to ensure that the pneumatic components to the gas source requirements.

4. Yamaha cylinder Use should be careful not to make the piston rod surface damage to prevent rod end seals damage, Yamaha cylinder air leakage.

5. After the Yamaha cylinder is installed, it should run 3-5 times according to the rated pressure, Cylinder for YAMAHA check for any abnormal phenomenon and then install the load to run.

6. Repair and maintenance, it is necessary to close the gas source beforehand and the pipeline compressed air drained, Cylinder for YAMAHA before the maintenance operation.